Anmelden
H9 Flow RGB+
Großes Dual-Kammer Mid-Tower ATX Luftstromgehäuse mit RGB
Optionen auswählen
Overview
Das H9 Flow ist ein geräumiges Mid-Tower-ATX-Gehäuse, das für Hochleistungs-Builds entwickelt wurde und Luftstrom und Ästhetik ausbalanciert. Sein Dual-Kammer-Design verbessert die Kühlung und das Kabelmanagement, während perforierte Paneele, angewinkelte Lüfter und reichlich Lüfter- und Radiatorunterstützung optimale thermische Leistung bieten.
- Dual-Kammer-Design: Trennt die Hauptkomponenten vom Netzteil und den Laufwerken für verbesserte thermische Leistung und Kabelmanagement.
- Optimierter Luftstrom: Perforierte Stahlplatten und angewinkelte Lüfter an der Vorderseite rechts sorgen für effiziente Kühlung bei Hochleistungsaufbauten.
- H9 Flow RGB+: * RGB-fähig: Beinhaltet zwei F420 RGB Core Einrahmen-Lüfter, einen F120 RGB Core (CV) Lüfter hinten und einen NZXT Control Hub. CV = Gehäuseversion (3-polig DC)
- Zehn-Lüfter-Kapazität: Unterstützt bis zu neun 140mm Lüfter oben, vorne rechts und unten, plus einen 120mm Lüfter hinten.
- Panoramablick: Präsentieren Sie jedes Detail Ihres Aufbaus mit nahtloser, umlaufender gehärteter Glasverkleidung.
- Große Radiatoren & GPUs: Passt zu einem 420mm Radiator oben und vorne rechts, mit viel Platz für High-End-Grafikkarten.
- Einfaches Kabelmanagement: Extra-breite Kanäle, eingebaute Klettverschlüsse und Befestigungspunkte machen die Kabelverlegung mühelos.
- Rückverbindungsbereit: Kompatibel mit rückverbindenden Motherboards wie ASUS BTF und MSI Project Zero für ein kabelloses Aussehen.
GEMACHT ZUM FLIEßEN. GEMACHT ZUM ZEIGEN.
Optimierter Luftstrom
GITTERPANEELE
GERÄUMIGE DOPPELKAMMER
10-LÜFTER-KÜHLUNG
GROSSE RADIATOREN
MAXIMALE GRAFIK
RÜCKVERBINDUNG BEREIT
EINFACHE KABELVERWALTUNG
- GGiuseppeVerified ReviewerRated 5 out of 5 starsAug 31, 2025Molto molto soddisfatto 😁
Ho acquistato questo case per sostituire il cade del mio pc , io ho acquistato un pc nuovo con tutti i componenti usciti nel 2025 quindi fascia alta 9800x3d 5070Ti mobo x870 gaming plus wifi ecc ecc ho acquistato questo case insieme all’alimentatore nzxt c1200 perché volevo migliorare sia l’aspetto sia il raffreddamento e l’alimentazione per futuri upgrade dato che avevo un 850w comunque è stato facilissimo assemblare il tutto è stato il mio primo pc assemblato da me non lo avevo mai fatto è stato bellissimo e divertente a volte spaventato quando dovevo toccare la cpu ma per il resto è stato molto molto facile il case è pieno di spazio dove passare i fili quindi ti permette di montare tutto con estrema accuratezza anche ai dettagli i materiali sembrano davvero di ottima fattura ma sopratutto sono passato da un case ( itek) dove io giocando a Warzone facevo 80/83 gradi di cpu a questo che adesso dopo vari giorni di prova e gioco non ho mai superato i 64 gradi in game mai veramente molto entusiasta del prodotto sono rimasto a bocca aperta ora vorrei solo prendere il kraken élite 420m nero però non lo trovo da nessuna parte spero sia al più presto disponibile, comunque su questo sito da cellulare non si riesce a mettere i prodotti nel carrello piccola segnalazione magari potreste sistemarlo un po’.. che dire davvero molto soddisfatto grazie NZXT complimenti per il prodotto e vi prego fate uscire il kraken élite rgb nero da 420m 😭😂 ps il dissipatore che ho al momento è quello…
- JGJoshua G.Verified BuyerRated 5 out of 5 starsAug 12, 2025Excellent quality. Need slightly taller cable channels.
Excellent case. Third NZXT case I’ve owned and super happy with it. Only negative is the upper channels for the CPU cables need to be a little taller for back-connect motherboards. Like 2-5mm taller. The connector latch couldn’t squeeze through to fully seat the cable into the motherboard. Won’t take a star off because I love this case still.
My setup:
CPU: AMD Ryzen 9 9950X3D
MB: Gigabyte X870 AORUS Stealth Ice
GPU: Gigabyte AORUS GTX 5090 Stealth Ice 32G
RAM: G.SKILL Trident Z5 NEO RGB 64GB (4x16GB)
SSD: Samsung 990 Pro 4TB SSD M.2
- CChristopherVerified ReviewerRated 5 out of 5 starsAug 7, 2025Quality case. Great CPU and GPU temps.
I've had this case for a few months now. Overall, i'm very happy with it.
Great build quality & excellent aesthetics. It has very good temps for this style of case. It also has lots of room for your components and airflow.
You can do push, pull on the side. I tried it. It works/fits. But, only with 120mm fan/radiator set up. Only standard width radiators will fit. The length of the graphics card dependent. It was a tight fit with my current set up(a mm gap from my anti-sag bracket).
Ultimately, I decided to go push pull on top with 420mm Kraken fan/radiator set up. Overall, I'm very happy with the case. This is my second Nzxt case & overall both seem to be quality pieces.
My setup:
Cpu: AMD Ryzen 9950X3D
Board: Asrock Nova X870e ATX
Gpu: Gigabyte Aorus Master 5090
Memory: G.SKILL Trident 64gb
Ssd: Crucial t705 4tb NVMe m.2
Ssd #2: WD_BLACK 8TB SN850X NVMe m.2
Monitor: Samsung odyssey neo g9 57
- AAlexVerified ReviewerRated 5 out of 5 starsAug 2, 2025Best Case in 2025 !!!
Es ist absolut das beste Gehäuse auf dem Markt für einen fairen Preis. Das Dual Chamber bietet sehr viel Platz und einfaches legen der Kabel. Das Gehäuse bietet eine schöne Optik für das Build und somit auch viel Platz für Lüfter, AiO Kühlungen und Grafikkarten. Der einzige Nachteil ist, dass man bei meiner MSI RTX 5080 die GPU Halterung nicht nutzen kann, da die zu kurz ist oder eben zu viel Luft zum Boden ist. Daher musste eine andere günstige Alternative her.
- CCChristopher C.Verified ReviewerRated 5 out of 5 starsJul 30, 2025Quality case. Great CPU and GPU temps.
I have had this case for a few months now. Overall, i'm very happy with it.
Great build quality & excellent aesthetics. It has very good temps for this style of case. It also has lots of room for your components and airflow.
You can do push, pull on the side. I tried it. It works/fits. But, only with 120mm fan/radiator set up. Only standard width radiators will fit. The length of the graphics card dependent. It was a tight fit with my current set up(a mm gap from my anti-sag bracket).
Ultimately, I decided to go push pull on top with 420mm Kraken fan/radiator set up. Overall, I'm very happy with the case. This is my second Nzxt case & overall both seem to be quality pieces.
My setup:
Cpu: AMD Ryzen 9950X3D
Board: Asrock Nova X870e ATX
Gpu: Gigabyte Aorus Master 5090
Memory: G.SKILL Trident 64gb
Ssd: Crucial t705 4tb NVMe m.2
Ssd #2: WD_BLACK 8TB SN850X NVMe m.2
Monitor: Samsung odyssey neo g9 57"
- NNickRated 4 out of 5 starsJul 17, 2025So close to being great. Still the best case I’ve had.
I’ve had 3-4 cases in the past. The lian li dynamic mini, Nzxt h9 flow 2024, Phantek evolv x2, and now this.
It’s a really good case and well diverse. Personally, I think a bunch of 360mm fans doesn’t look as good as 420mm fans that fill in all of the space. 420mm (140x3) fans provide a slight temperature decrease by 3-4c under load but the main advantage is the less noise they produce. Saying that, 360mm fans will work fine and the temperature difference doesn’t really matter. But, if you want the best performance and aesthetic then get 420mm. The side mounted radiator also looks better than a top imo. A top mounted radiator eats up a lot of vertical space. The side mounted 420mm radiator fills in the angled space. Also, the view of the fans aren’t cut off as they would be with a top mounted. I used this case with a backward connect motherboard which had some issues.
Performance wise, it’s what you would expect you get in a case with a bunch of 140mm fans. The best performing case I’ve had.
There’s only one dust filter and it’s on the bottom. I don’t know why they didn’t add dust filters on every other meshed area of the case because there’s a lot of them. The holes are small enough where I don’t think too much dust will get in but definitely not as small as the cut outs of a dust filter.
The case is almost tool-less. NZXT really thought it through. You dont even need to watch a YouTube video or read the manual, it’s pretty straightforward. Most of the screws are twist…
- CMchris m.Verified BuyerRated 3 out of 5 starsJul 6, 2025its a good case however
It is a good case however there is still much that needs improved. There is a lot of room for activities.
To mount water-cooling on the front side is kind of a pain and you cant put the radiator in the correct orientation due to there not being enough room for the lines. You also cant do push pull in this location. Overall im jus meh with the case. I havnt tried to top mount the Rad yet that will be a whole different endeavor.
The case is also not tooless. There are way to many tiny screws. Way to many.
- PparandroidVerified ReviewerRated 5 out of 5 starsJun 10, 2025Look Meets Function
I have already built a setup in a H6 Flow RGB, but for myself it would have been too small. Previous H9 would have been an option, but I do not like the arrengement of the side fans in the plane of the mainboard. Then I have seen this in the Computex 2025 news, and fell in love at first sight. Just what I've been looking for.
+ Price is somewhat horrendous, but hey, it comes with all the fans + the controller we need, and in the end, it looks marvelous.
+ Quality is the usual nzxt level, keep up the good work guys.
+ Air flow is just supreme, noise level can be kept down at low temperature (and I somehow love the turbine noise at startup when all the fans are released at 100% xD ).
+ Installation, hardware upgrade is a walk in the park, it's the most spacious case I ever worked with.
+ It looks awesome!
Still some minor points for improvement:
- Rear fan placement and implementation needs a second thought or two, it stands out in the wrong way - not as fluid and smooth in design as all the others.
- No in-house solution for GPU anti sag. Still had to find a 3rd party solution and that does not look so good. The nzxt vertical bracket would also look strange in this one, and not everyone wants a vertical GPU that hides most of the mainboard.
- Cable management (cable holes) between the two compartment could be somewhat better covered.
Due to pricing and the few little annoyances I would rate it 9,5/10, but no question about the 5 stars rating. Would buy it again. And…
- ONOli N.Verified BuyerRated 5 out of 5 starsJun 5, 2025This is what I'm looking for
Good case, good airflow. Everything is perfect inside the case