Cambiar idioma

País

Cesta

La cesta está vacía
The NZXT H9 Flow is a white ATX case with a transparent side panel, visible front and rear cooling fans for airflow, and multiple USB ports on the bottom front edge.
The NZXT H9 Flow is a white ATX case with an angled front-right corner, dual-chamber design for better airflow, and labeled dimensions: 506mm (H) x 481mm (D) x 315mm (W).
The NZXT H9 Flow is a white ATX case with three pre-installed front fans, one rear fan, optimized airflow, and includes F140Q and F120Q three-pin DC fans. Three additional fans are placed outside the case.
The NZXT H9 Flow is a dual-chamber ATX case with labeled spots for radiators and fans, supporting up to 420 mm radiators on top and front, 360 mm on the bottom, and up to ten fans. Text reads Expansive Cooling.
The NZXT H9 Flow case features a spacious interior highlighted in purple, supporting high-performance GPUs up to 435mm for maximum graphics and optimized airflow.
The NZXT H9 Flow ATX case is shown with a dual-chamber design, clearly separating components. Arrows highlight optimized airflow for better cooling and easier cable management. Text reads: “Dual-Chamber Design. Spacious layout boosts airflow and organization.”.
The NZXT H9 Flow is a white ATX case with wraparound glass panels that reveal internal components and cooling fans; text below reads Panoramic Paneling, describing its clear view and airflow optimized for showcasing your build.
The NZXT H9 Flow, a white ATX case with its side panel open, shows a clean dual-chamber design optimized for back-connect motherboards. Purple highlights mark support zones. Text: “Back-Connect Support. Compatible with ASUS BTF and MSI Project Zero.”.
The NZXT H9 Flow is a white ATX case with purple-accented cable channels and straps, featuring a dual-chamber design for easy cable management, wide channels, built-in Velcro straps, and multiple tie-down points.
The NZXT H9 Flow is a black ATX case featuring a transparent side panel, visible cooling fans for optimized airflow, an empty interior, and convenient front panel ports.
The NZXT H9 Flow is a black ATX case with a dual-chamber design, glass panels to showcase the interior and cooling fans, and measures 506mm (height) x 481mm (depth) x 315mm (width).
The NZXT H9 Flow ATX case offers a dual-chamber design for optimized airflow, supports up to ten fans, and accommodates radiators up to 420mm (top/front), 360mm (bottom), and 120mm (rear).
The NZXT H9 Flow, a black ATX case, features three pre-installed F140Q (CV) front-right fans and one F120Q (CV) rear fan for optimized airflow. CV stands for Case Version (3-pin DC).
Close-up of the NZXT H9 Flow ATX case build, showing space for graphics cards up to 435 mm, with a “50 SERIES READY” label. Caption: “H9 Flow: Dual-chamber design optimizes airflow and supports GPUs up to 435 mm.”.
The NZXT H9 Flow is a dual-chamber ATX case featuring wraparound glass panels that showcase internal components and sleek cable management, offering a panoramic view to turn your build into a visual display.
The NZXT H9 Flow is an ATX case with a spacious dual-chamber design that separates heat-generating parts for improved airflow and easier cable management.
The NZXT H9 Flow is a black ATX case with a dual-chamber design and open side panel, optimized for back-connect motherboards. Compatible with ASUS BTF and MSI Project Zero for a clean, cable-free interior.
The NZXT H9 Flow ATX case in black with purple accents is displayed open, highlighting wide cable channels, Velcro straps, tie-down points for easy cable management, and optimized airflow among other features.

H9 Flow

Caja de Flujo de Aire ATX de Torre Media de Gran Cámara Dual

4.2
Rated 4.2 out of 5 stars
4.2 Stars (18 Reviews)
Color:White

Your Prepay and Save Options

Choose the plan that works best for you.

Month-to-Month

Cancel and return anytime with no fees. This option provides maximum flexibility with no long-term obligations.

Prepaid Terms

Prepay for a multi-month term (3, 6, 12 months) and lock in a lower effective monthly rate.

When your term ends, you have simple options:

1

Month-to-Month: By default, your subscription automatically converts to the month to month rate requiring no action from you.

2

Prepay Again: Alternatively, you can choose to prepay for another 3, 6, or 12 month term.

3

End Subscription: Cancel and return with no fees.

Overview

El H9 Flow es una espaciosa caja ATX de torre media diseñada para construcciones de alto rendimiento, equilibrando el flujo de aire y la estética. Su diseño de doble cámara mejora la refrigeración y la gestión de cables, mientras que los paneles perforados, los ventiladores angulados y el amplio soporte para ventiladores y radiadores ofrecen un rendimiento térmico óptimo.

  • Diseño de Doble Cámara: Separa los componentes principales de la PSU y las unidades para mejorar el rendimiento térmico y la gestión de cables.
  • Flujo de Aire Optimizado: Los paneles de acero perforados y los ventiladores frontales-derechos angulados aseguran una refrigeración eficiente para construcciones de alto rendimiento.
  • Ventiladores Preinstalados: Incluye tres ventiladores F140Q (CV) en el frente-derecho y un ventilador F120Q (CV) en la parte trasera. CV = Versión de Caja (3 pines DC)
  • Capacidad para Diez Ventiladores: Soporta hasta nueve ventiladores de 140mm en la parte superior, frente-derecho y parte inferior, más un ventilador de 120mm en la parte trasera.
  • Vista Panorámica: Muestra cada detalle de tu construcción con paneles de vidrio templado envolventes y sin costuras.
  • Grandes Radiadores y GPUs: Acomoda hasta un radiador de 420mm en la parte superior y frente-derecho, con suficiente espacio para tarjetas gráficas de alta gama.
  • Gestión de Cables Fácil: Canales extra anchos, correas de Velcro integradas y puntos de sujeción hacen que el enrutamiento de cables sea sencillo.
  • Listo para Conexión Trasera: Compatible con placas base de conexión trasera como ASUS BTF y MSI Project Zero para un aspecto sin cables.
H9 Line up - Built to Flow. Made to Show.

CONSTRUIDO PARA FLUIR. HECHO PARA MOSTRAR.

El H9 Flow es una espaciosa caja de doble cámara diseñada para construcciones de alto rendimiento, con amplio soporte de refrigeración y paneles de vidrio envolventes para una vista ininterrumpida de tu construcción.
A PC case with RGB lighting, illustrating airflow: blue arrows show cool air entering from the bottom and right, while purple arrows show warm air exiting from the top and left. Temperature display on the CPU cooler reads 32°C.

Flujo de aire optimizado

Ventiladores frontales en ángulo a la derecha y un diseño optimizado para el flujo de aire mantienen bajas las temperaturas y el rendimiento estable.
Close-up view of a black computer case with a mesh front panel showing two cooling fans inside. The case has a sleek, modern design with sharp edges and a partially visible glass side panel.

PANELES DE MALLA

Malla ultra fina de alto flujo de aire maximiza el flujo de aire mientras filtra el polvo.
Two computer towers: one black with a transparent side panel showing fans, and one white with a clear panel revealing RGB-lit components, liquid cooling, and a digital display inside.

CÁMARA DUAL ESPACIOSA

Separa las fuentes de calor para mejorar el flujo de aire y lograr una construcción más limpia.
Side view of a PC case with labeled fan/radiator mounting locations: front (3x120mm/3x140mm), top (3x120mm/3x140mm), bottom (3x120mm/3x140mm), and rear (1x120mm/1x140mm).

10 VENTILADORES

Admite hasta nueve ventiladores de 140 mm y un ventilador trasero de 120 mm.

A white gaming PC case with RGB fans and a digital display, showing interior liquid cooling tubes. Purple labels indicate maximum radiator sizes: 420 mm top/right, 120 mm rear, and 360 mm bottom.

RADIADORES GRANDES

Admite radiadores de 420 mm en la parte superior y frontal para una refrigeración flexible.
Close-up of a computers interior showing an NZXT-branded cooler with a digital display reading 32°C GPU. Purple overlay text reads Up to 435mm. Bottom right has a green label: 50 Series Ready.

GRÁFICOS MÁXIMOS

Admite GPUs de hasta 435 mm, proporcionando mucho espacio para tarjetas gráficas de gama alta.
Open white computer case showing interior with highlighted motherboard tray and cable management sections in purple gradient. Multiple cable routing channels and mounting points are visible.

CONECTORES TRASEROS

Compatible con las placas base ASUS BTF y MSI Project Zero para un aspecto sin cables.

A black NZXT computer case with its side panel open, revealing an empty interior and highlighted mounting areas. A circular inset zooms in on an internal NZXT-branded strap.

GESTIÓN FÁCIL DE CABLES

Canales extra anchos, correas de velcro y puntos de amarre simplifican el enrutamiento de cables.
Tech Specs
Altura
506 mm (19,9 in)
Anchura
315 mm (12,4 in)
Profundidad
481 mm (18,9 in)
Volumen
76,7 L
Peso
12,46 kg (27,47 lb)
Tipo de carcasa
Semitorre
Compatibilidad de la placa base
E-ATX (hasta 277 mm), ATX, Micro-ATX, Mini-ITX
Soporte para placa base con conexión trasera (BTF, Project Zero)
Sí (ATX, Micro-ATX)
Materiales
Acero SGCC, vidrio templado transparente (blanco), vidrio templado tintado (negro)
Altura del ventilador de la CPU
165 mm
Longitud de la GPU
Hasta 459 mm (con ventiladores de <56 mm de grosor instalados en la parte frontal derecha) Hasta 410 mm (con AIO de 420 mm de 56 mm de grosor y ventiladores instalados en la parte frontal derecha)
Longitud de la PSU
200 mm
Grosor del radiador y del ventilador superior
Hasta 80 mm (360 mm) Hasta 62 mm (420 mm)
USB 3.2 Type-A
2
USB 3.2 Gen2x2 Type-C
1
Conector de auriculares
1
Estándar
7
Vertical
0
2,5"
4+2
3,5"
2
Delantero derecho
3 x 120 mm / 3 x 140 mm (3 x F140Q (CV) incluidos)
Superior
3 x 120 mm / 3 x 140 mm
Inferior
3 x 120 mm / 3 x 140 mm
Trasero
1 x 120 mm (1 x F120Q (CV) incluido)
Delantero derecho
Hasta 420 mm
Superior
Hasta 420 mm
Inferior
Hasta 360 mm
Trasero
Hasta 120 mm
Modelo
F140Q (CV)
Velocidad
1 350 ± 150 RPM
Corriente de aire
100,25 CFM
Presión estática
1,4 mm-H₂O
Ruido
22,9 dBA
Conector del ventilador
3 pines
Modelo
F120Q (CV)
Velocidad
1 350 ± 150 RPM
Corriente de aire
60,2 CFM
Presión estática
1,05 mm-H₂O
Ruido
24,1 dBA
Conector del ventilador
3 pines
GARANTÍA
2 años
Número de modelo
CM-H92FW-01 CM-H92FB-01
UPC
810074847841 810074847858
EAN
5056547207636 5056547207643
4.2
Rated 4.2 out of 5 stars
Based on 18 reviews
83%would recommend this product
Total 5 star reviews: 10 Total 4 star reviews: 5 Total 3 star reviews: 1 Total 2 star reviews: 1 Total 1 star reviews: 1
Write a Review (Opens in a new window)
18 reviews
  • C
    Charles
    Verified Reviewer
    I do not recommend this product
    Rated 2 out of 5 stars
    2 weeks ago
    No front dust filter. Sad face.

    Not sure what they were thinking. Putting a filter on the bottom but not the front. Prepare yourself for cleaning once a week. At least offer a magnetic filter option for the front.

    Was this helpful?
  • AG
    Alex G.
    Verified Buyer
    I recommend this product
    Product Standouts Great Quality, Value for Money, Ease of use, Design
    Rated 5 out of 5 stars
    1 month ago
    Good design

    Looked around for my first build, chose this one and was very impressed/relieved how well thought out this case is , sturdy frame, and good size for everything and more for upgrades with a clean build.

    Haven’t found any cons to list.

    Was this helpful?
  • K
    Kevin
    I recommend this product
    Rated 5 out of 5 stars
    2 months ago
    5 Stars

    Amo este case de NZXT Se a convertido en mi compañia fav de PC, Para el que necesite saber, Este es el mejor case con el mejor sistema de ventilacion con hasta 10 abanicos en totales, Y si compras la refrigeración liquida (AIO) para el CPU, Confia en mi que no te arrepentirás....

    Was this helpful?
  • BW
    Brayton w.
    Rated 3 out of 5 stars
    2 months ago
    Not a fan of it

    This case has been a pain, wanted to support my gpu up but it obviously doesn’t even have a bottom platform to do so because of the vent at bottom, so I got the Nzxt vertical mountain kit, the h9 has holes in case to install screws through for the supporting bracket but not for the h9 flow, currently taking a drill to my case so I can get that bracket in otherwise the right side of the vertical mountain kit is just floating there. This case has been the biggest pain and I regret buying it

    Was this helpful?
  • DC
    Destin C. w.
    Verified Buyer
    I recommend this product
    Product Standouts Great Quality, Value for Money, Design
    Rated 5 out of 5 stars
    3 months ago
    Best gaming pc case

    I love it cant wait to build it and game.

    Was this helpful?
Show More

Frequently Asked Questions

LegalPrivacy PolicyTerms of ServiceDo Not Sell or Share My Personal Information