Skip to content

Meet the C1200 Platinum: ATX 3.1, One Cable to the Graphics Card

80 PLUS Platinum efficiency behind ATX 3.1 and one 600 W connector. Fully modular, silent under light load, backed by a 10-year warranty.

Read more

Meet the F360Q and F420Q Quiet Airflow: Three Fans, One Frame

The F360Q and F420Q put three nine-blade airflow sets into one frame on a single 4-pin PWM connector. Strong intake and exhaust airflow, quiet fluid dynamic bearings, and a clean face in Black or White.

Read more

Meet the H5 and H5 RGB+: So Compact. So Capable.

The front and left side of the H5 are one formed panel of curved tempered glass, not two sheets joined at a corner. The H5 vents through a high-airflow steel mesh top; the H5 RGB+ closes the top in Vista Mode glass and arrives with its fans installed and wired, ready to tune in NZXT CAM.

Read more

Meet the H7 and H7 RGB+: Built to Be Seen

One formed panel of curved tempered glass wraps the front and left side, and both models ship with a matching glass top in Vista Mode, so the view runs front to side to top. A steel mesh panel comes in the box for a 420 mm top-radiator build.

Read more

Meet the Kraken Core 360 and 420: Built Simple. Built Right.

An Asetek pump on copper with the paste already applied, under a semi-transparent cap that reveals concentric rings layered inside. One fan, one cable — no hubs and no controllers.

Read more

Meet the Kraken Plus 360 RGB: Cool. Any way you look at it.

Asetek’s new Gen 9 pump on a copper cold plate, built to run quiet, under a 1.8-inch display that fills the pump cap edge to edge — with lighting carried across an all-in-one RGB single-frame fan.

Read more

Meet the Vertical GPU Mounting Kit PCIe 5.0: Tested at Full Bandwidth

Tested at full PCIe 5.0 bandwidth on a steel bracket that holds a heavy card level. Five slots, three mounting heights, and a high wall of solid steel over the opening.

Read more
Behind the Design

Meet the S5 RGB and S5 RGB Deluxe: Real Steel, Real Glass, Lit Out of the Box

The S series is back, in two versions of the same steel ATX mid-tower. The S5 RGB arrives with a 360 mm RGB reverse fan already pointed at the glass. The S5 RGB Deluxe arrives with the whole fan layout built — three units, five fans, three planes lit.

Read more

NZXT RGB Fans, Refreshed: Less to Install. More to Show.

The refreshed NZXT RGB Fan lineup now ships in single-frame 360mm and 420mm designs that install with four screws and one 8-pin connector, plus reverse-blade models that keep the illuminated side facing the viewer.

Read more

NZXT Ultra RGB Fans: More Light. More Control.

Multi-zone addressable lighting. Up to 96 LEDs across three independent zones per single-frame fan. Whisper-quiet operation under 37 dB at full speed. Single-frame designs that install with four screws and one 8-pin adapter.

Read more

The New NZXT H6: Compact Dual-Chamber, Built Your Way.

Compact 55L dual-chamber ATX mid-tower with one-piece curved tempered glass, support for up to 10 × 120mm fans, a built-in GPU anti-sag bracket, and back-connect motherboard compatibility.

Read more
Behind the Design

H2 Flow Riser Card Design: Engineering Transparency & Safety Explained

We're addressing recent community concerns about the H2 Flow PCIe 5.0 riser card design — here's a full breakdown of the engineering decisions that make it safe, and why it's built differently from the H1.

Read more
Uploaded Image 7

Stay in Touch with NZXT

Keep up to date on new releases, offers, and news