H9 Flow RGB+

Ho acquistato questo case per sostituire il cade del mio pc , io ho acquistato un pc nuovo con tutti i componenti usciti nel 2025 quindi fascia alta 9800x3d 5070Ti mobo x870 gaming plus wifi ecc ecc ho acquistato questo case insieme all’alimentatore nzxt c1200 perché volevo migliorare sia l’aspetto sia il raffreddamento e l’alimentazione per futuri upgrade dato che avevo un 850w comunque è stato facilissimo assemblare il tutto è stato il mio primo pc assemblato da me non lo avevo mai fatto è stato bellissimo e divertente a volte spaventato quando dovevo toccare la cpu ma per il resto è stato molto molto facile il case è pieno di spazio dove passare i fili quindi ti permette di montare tutto con estrema accuratezza anche ai dettagli i materiali sembrano davvero di ottima fattura ma sopratutto sono passato da un case ( itek) dove io giocando a Warzone facevo 80/83 gradi di cpu a questo che adesso dopo vari giorni di prova e gioco non ho mai superato i 64 gradi in game mai veramente molto entusiasta del prodotto sono rimasto a bocca aperta ora vorrei solo prendere il kraken élite 420m nero però non lo trovo da nessuna parte spero sia al più presto disponibile, comunque su questo sito da cellulare non si riesce a mettere i prodotti nel carrello piccola segnalazione magari potreste sistemarlo un po’.. che dire davvero molto soddisfatto grazie NZXT complimenti per il prodotto e vi prego fate uscire il kraken élite rgb nero da 420m 😭😂 ps il dissipatore che ho al momento è quello…

I bought it a few weeks ago and I'm really happy except for how the rgb-fan situation is.

Every fan except the back one is basically the wrong direction, which means you see the backside of it all the time. That wouldn't be the issue but if I sit on my desk and look to the side where my pc stands then I see the leds flickering through the small gap between fan and housing. Its so annoying that I had to turn off the leds that look into my direction. There is still some flickering on the inside but its alot better that way.

Other than that, its a really solid case. Its easy to build in and the cooling potential is amazing!

I switched to the NZXT H9 Flow RGB+ about two months ago after several years of using an NZXT H710. While the case is visually stunning, several quality and design decisions make it hard to justify its premium price.

Pros

- One of the most visually striking fishtank cases on the market.

- Angled front fans look great and provide strong airflow.

- Plenty of space for cable management in the back with cable channels that have Velcro strips to secure the cables.

- I really like the SSD mount that you can "open" like a door. Also, great to hide not managed cables.

Cons

- Visible panel gap

The gap between the front and side glass panels cheapens the appearance.

- Poor dust filtration

Only one dust filter at the bottom of the case, with no front or top filters. It would have been nice to have them as optional accessories. NZXT claims the front and top mesh do not require filters, but in my experience this is not true. The top may be less critical since it is usually for exhaust fans, but the front intake fans should've really had one you could slide in from the side, just like the bottom one has. My top-mounted AIO radiator became heavily clogged with dust after only two months. My previous H710 required deep cleaning only once per year under similar conditions and never accumulated as much dust.

- Pre-installed 420 millimeter Core fan units

Suffer from resonance noise at certain RPM ranges. The fans are mounted using only four screws, which is insufficient for their size…

Excellent case. Third NZXT case I’ve owned and super happy with it. Only negative is the upper channels for the CPU cables need to be a little taller for back-connect motherboards. Like 2-5mm taller. The connector latch couldn’t squeeze through to fully seat the cable into the motherboard. Won’t take a star off because I love this case still.

My setup:

CPU: AMD Ryzen 9 9950X3D

MB: Gigabyte X870 AORUS Stealth Ice

GPU: Gigabyte AORUS GTX 5090 Stealth Ice 32G

RAM: G.SKILL Trident Z5 NEO RGB 64GB (4x16GB)

SSD: Samsung 990 Pro 4TB SSD M.2

I've had this case for a few months now. Overall, i'm very happy with it.

Great build quality & excellent aesthetics. It has very good temps for this style of case. It also has lots of room for your components and airflow.

You can do push, pull on the side. I tried it. It works/fits. But, only with 120mm fan/radiator set up. Only standard width radiators will fit. The length of the graphics card dependent. It was a tight fit with my current set up(a mm gap from my anti-sag bracket).

Ultimately, I decided to go push pull on top with 420mm Kraken fan/radiator set up. Overall, I'm very happy with the case. This is my second Nzxt case & overall both seem to be quality pieces.

My setup:

Cpu: AMD Ryzen 9950X3D

Board: Asrock Nova X870e ATX

Gpu: Gigabyte Aorus Master 5090

Memory: G.SKILL Trident 64gb

Ssd: Crucial t705 4tb NVMe m.2

Ssd #2: WD_BLACK 8TB SN850X NVMe m.2

Monitor: Samsung odyssey neo g9 57

Es ist absolut das beste Gehäuse auf dem Markt für einen fairen Preis. Das Dual Chamber bietet sehr viel Platz und einfaches legen der Kabel. Das Gehäuse bietet eine schöne Optik für das Build und somit auch viel Platz für Lüfter, AiO Kühlungen und Grafikkarten. Der einzige Nachteil ist, dass man bei meiner MSI RTX 5080 die GPU Halterung nicht nutzen kann, da die zu kurz ist oder eben zu viel Luft zum Boden ist. Daher musste eine andere günstige Alternative her.