Anmelden
H9 Flow
Großes Dual-Kammer Mid-Tower ATX Luftstromgehäuse
Optionen auswählen
Overview
Das H9 Flow ist ein geräumiges Mid-Tower-ATX-Gehäuse, das für Hochleistungs-Builds entwickelt wurde und Luftstrom und Ästhetik ausbalanciert. Sein Dual-Kammer-Design verbessert die Kühlung und das Kabelmanagement, während perforierte Paneele, angewinkelte Lüfter und reichlich Lüfter- und Radiatorunterstützung optimale thermische Leistung bieten.
- Dual-Kammer-Design: Trennt die Hauptkomponenten vom Netzteil und den Laufwerken für verbesserte thermische Leistung und Kabelmanagement.
- Optimierter Luftstrom: Perforierte Stahlplatten und angewinkelte Lüfter an der Vorderseite rechts sorgen für effiziente Kühlung bei Hochleistungsaufbauten.
- Vorgefertigte Lüfter: Beinhaltet drei F140Q (CV) Lüfter an der Vorderseite rechts und einen F120Q (CV) Lüfter hinten. CV = Gehäuseversion (3-polig DC)
- Zehn-Lüfter-Kapazität: Unterstützt bis zu neun 140mm Lüfter oben, vorne rechts und unten, plus einen 120mm Lüfter hinten.
- Panoramablick: Präsentieren Sie jedes Detail Ihres Aufbaus mit nahtloser, umlaufender gehärteter Glasverkleidung.
- Große Radiatoren & GPUs: Passt zu einem 420mm Radiator oben und vorne rechts, mit viel Platz für High-End-Grafikkarten.
- Einfaches Kabelmanagement: Extra-breite Kanäle, eingebaute Klettverschlüsse und Befestigungspunkte machen die Kabelverlegung mühelos.
- Rückverbindungsbereit: Kompatibel mit rückverbindenden Motherboards wie ASUS BTF und MSI Project Zero für ein kabelloses Aussehen.
GEMACHT ZUM FLIEßEN. GEMACHT ZUM ZEIGEN.
Optimierter Luftstrom
GITTERPANEELE
GERÄUMIGE DOPPELKAMMER
10-LÜFTER-KÜHLUNG
GROSSE RADIATOREN
MAXIMALE GRAFIK
RÜCKVERBINDUNG BEREIT
EINFACHE KABELVERWALTUNG
- EHEthan H.Verified BuyerRated 4 out of 5 stars6 days agoSpace + Airflow
Cables look very clean with shrouds. Great airflow. Wish the basic fans that came with were quieter, I replaced them and the sound is much better.
- GVGabriel V.Verified BuyerRated 4 out of 5 stars2 weeks agoWould buy again
I recently bought this case because it matched the “fishbowl” aesthetic that I wanted. It looks amazing and exactly what I was expecting. The only problem is that it is somewhat wide.
- OGOscar G.Verified ReviewerRated 5 out of 5 stars1 month agoDoes it support for a 360mm radiator on the top or front-right panel
Hi NZXT. I just bought this yesterday. I'm planning to buy AIO 420mm radiator. Unfortunately, in my country only 360mm is available. I'm wondering if KRAKEN ELITE 360 RGB V2 fit in my H2 flow RGB?
NNZXT1 month agoHi Oscar,
Thank you for your question and for choosing the H9 Flow! To clarify, the NZXT H2 is still unreleased, and it will not support a 360mm radiator.
For a 360mm radiator like the Kraken Elite 360 RGB V2, you’ll need to use the NZXT H5 (2024 model) or a larger case in our lineup to ensure compatibility.
We hope this helps with your build planning, and we appreciate you being part of the NZXT community!
- KGKristoffer G.Verified BuyerRated 4 out of 5 stars2 months agoGreat product - instructions could be better
Very roomy case so the design is is better than the H7 I ordered for another project.
Some minor nitpicks.
The NZXT 420 radiator could not fit on the front but was fine on the top. The actual radiator fits but the extrusion for the hoses does not in the front position. Strange that they say 420 will fit but not their own. I used the front slot for a GPU water cooler so all is good. I also have the lighting hub but I only noticed after installing the motherboard that the tightening screws are under the motherboard so a sticker there would have helped and save time. Only last thing the motherboard screws were a bit flimsy so I used my own.
Overall once you done the build the end result is great.
- CBChristopher B.Verified ReviewerRated 4 out of 5 stars3 months agoBeautiful case.
Upgraded from the original H9 — and the improvements are obvious.
Cable management was already top-tier in the previous model, but NZXT has enhanced it further. There’s noticeably more space behind the motherboard tray, and the upgraded Velcro straps are now wider and more secure.
The case is rear motherboard compatible, which was a key selling point for me and a major step forward for future-proofing. It also supports 420mm radiators, offering more room than ever for advanced cooling setups.
One standout improvement is the cutout at the top, which allows you to route your AIO tubes cleanly and efficiently. It’s a simple addition, but a huge win for cleaner builds and less strain on tubing.
Build quality across the board is excellent: tool-less latches, thumb screws, removable dust filters, and magnetic panels make everything more convenient. And if you’re using NZXT RGB fans, the RGB variant of the case includes them pre-installed, which means you don’t need to buy extra fans — a huge value add.
One drawback: Lian Li Infinity fans don’t fit properly on the rear exhaust. I saw others on Reddit grinding the fan frame to make them fit, but I wasn’t willing to do that. I ended up force-fitting the fan, which isn’t ideal due to the pressure it puts on the frame and lighting elements — but it looks clean.
Final recommendation: NZXT should revise the rear exhaust mount to better accommodate a wider variety of fans. This issue existed in the previous H9 Flow as well — it’s…
- RTRyan T.Verified BuyerRated 4 out of 5 stars3 months agoGreat Chassis w/ minor nit
I understand why the buttons were moved to the bottom and love the airflow improvements that opened up. But I really miss the I/o ports and power button being more accessible. Little nit pick but everything else about this chassis is amazing.
- CScraig s.Verified BuyerRated 5 out of 5 stars4 months agoBeautiful and functional
Case does exactly what it's designed to do, maximize airflow and look stunning. Easy to build in and cable manage.