Sprache ändern

Land

Warenkorb

Dein Warenkorb ist leer
The NZXT H9 Flow is a white ATX case with a transparent side panel, visible front and rear cooling fans for airflow, and multiple USB ports on the bottom front edge.
The NZXT H9 Flow is a white ATX case with an angled front-right corner, dual-chamber design for better airflow, and labeled dimensions: 506mm (H) x 481mm (D) x 315mm (W).
The NZXT H9 Flow is a white ATX case with three pre-installed front fans, one rear fan, optimized airflow, and includes F140Q and F120Q three-pin DC fans. Three additional fans are placed outside the case.
The NZXT H9 Flow is a dual-chamber ATX case with labeled spots for radiators and fans, supporting up to 420 mm radiators on top and front, 360 mm on the bottom, and up to ten fans. Text reads Expansive Cooling.
The NZXT H9 Flow case features a spacious interior highlighted in purple, supporting high-performance GPUs up to 435mm for maximum graphics and optimized airflow.
The NZXT H9 Flow ATX case is shown with a dual-chamber design, clearly separating components. Arrows highlight optimized airflow for better cooling and easier cable management. Text reads: “Dual-Chamber Design. Spacious layout boosts airflow and organization.”.
The NZXT H9 Flow is a white ATX case with wraparound glass panels that reveal internal components and cooling fans; text below reads Panoramic Paneling, describing its clear view and airflow optimized for showcasing your build.
The NZXT H9 Flow, a white ATX case with its side panel open, shows a clean dual-chamber design optimized for back-connect motherboards. Purple highlights mark support zones. Text: “Back-Connect Support. Compatible with ASUS BTF and MSI Project Zero.”.
The NZXT H9 Flow is a white ATX case with purple-accented cable channels and straps, featuring a dual-chamber design for easy cable management, wide channels, built-in Velcro straps, and multiple tie-down points.
The NZXT H9 Flow is a black ATX case featuring a transparent side panel, visible cooling fans for optimized airflow, an empty interior, and convenient front panel ports.
The NZXT H9 Flow is a black ATX case with a dual-chamber design, glass panels to showcase the interior and cooling fans, and measures 506mm (height) x 481mm (depth) x 315mm (width).
The NZXT H9 Flow ATX case offers a dual-chamber design for optimized airflow, supports up to ten fans, and accommodates radiators up to 420mm (top/front), 360mm (bottom), and 120mm (rear).
The NZXT H9 Flow, a black ATX case, features three pre-installed F140Q (CV) front-right fans and one F120Q (CV) rear fan for optimized airflow. CV stands for Case Version (3-pin DC).
Close-up of the NZXT H9 Flow ATX case build, showing space for graphics cards up to 435 mm, with a “50 SERIES READY” label. Caption: “H9 Flow: Dual-chamber design optimizes airflow and supports GPUs up to 435 mm.”.
The NZXT H9 Flow is a dual-chamber ATX case featuring wraparound glass panels that showcase internal components and sleek cable management, offering a panoramic view to turn your build into a visual display.
The NZXT H9 Flow is an ATX case with a spacious dual-chamber design that separates heat-generating parts for improved airflow and easier cable management.
The NZXT H9 Flow is a black ATX case with a dual-chamber design and open side panel, optimized for back-connect motherboards. Compatible with ASUS BTF and MSI Project Zero for a clean, cable-free interior.
The NZXT H9 Flow ATX case in black with purple accents is displayed open, highlighting wide cable channels, Velcro straps, tie-down points for easy cable management, and optimized airflow among other features.

H9 Flow

Großes Dual-Kammer Mid-Tower ATX Luftstromgehäuse

4.2
Rated 4.2 out of 5 stars
4.2 Stars (18 Reviews)
Color:

Color

Your Prepay and Save Options

Choose the plan that works best for you.

Month-to-Month

Cancel and return anytime with no fees. This option provides maximum flexibility with no long-term obligations.

Prepaid Terms

Prepay for a multi-month term (3, 6, 12 months) and lock in a lower effective monthly rate.

When your term ends, you have simple options:

1

Month-to-Month: By default, your subscription automatically converts to the month to month rate requiring no action from you.

2

Prepay Again: Alternatively, you can choose to prepay for another 3, 6, or 12 month term.

3

End Subscription: Cancel and return with no fees.

Overview

Das H9 Flow ist ein geräumiges Mid-Tower-ATX-Gehäuse, das für Hochleistungs-Builds entwickelt wurde und Luftstrom und Ästhetik ausbalanciert. Sein Dual-Kammer-Design verbessert die Kühlung und das Kabelmanagement, während perforierte Paneele, angewinkelte Lüfter und reichlich Lüfter- und Radiatorunterstützung optimale thermische Leistung bieten.

  • Dual-Kammer-Design: Trennt die Hauptkomponenten vom Netzteil und den Laufwerken für verbesserte thermische Leistung und Kabelmanagement.
  • Optimierter Luftstrom: Perforierte Stahlplatten und angewinkelte Lüfter an der Vorderseite rechts sorgen für effiziente Kühlung bei Hochleistungsaufbauten.
  • Vorgefertigte Lüfter: Beinhaltet drei F140Q (CV) Lüfter an der Vorderseite rechts und einen F120Q (CV) Lüfter hinten. CV = Gehäuseversion (3-polig DC)
  • Zehn-Lüfter-Kapazität: Unterstützt bis zu neun 140mm Lüfter oben, vorne rechts und unten, plus einen 120mm Lüfter hinten.
  • Panoramablick: Präsentieren Sie jedes Detail Ihres Aufbaus mit nahtloser, umlaufender gehärteter Glasverkleidung.
  • Große Radiatoren & GPUs: Passt zu einem 420mm Radiator oben und vorne rechts, mit viel Platz für High-End-Grafikkarten.
  • Einfaches Kabelmanagement: Extra-breite Kanäle, eingebaute Klettverschlüsse und Befestigungspunkte machen die Kabelverlegung mühelos.
  • Rückverbindungsbereit: Kompatibel mit rückverbindenden Motherboards wie ASUS BTF und MSI Project Zero für ein kabelloses Aussehen.
H9 Line up - Built to Flow. Made to Show.

GEMACHT ZUM FLIEßEN. GEMACHT ZUM ZEIGEN.

Das H9 Flow ist ein geräumiges Gehäuse mit zwei Kammern, das für Hochleistungs-Builds entwickelt wurde und umfangreiche Kühlunterstützung sowie umlaufende Glasplatten für einen ununterbrochenen Blick auf Ihr Build bietet.
A PC case with RGB lighting, illustrating airflow: blue arrows show cool air entering from the bottom and right, while purple arrows show warm air exiting from the top and left. Temperature display on the CPU cooler reads 32°C.

Optimierter Luftstrom

Abgewinkelte vordere rechte Lüfter und ein luftstromoptimiertes Layout halten die Temperaturen niedrig und die Leistung stabil.
Close-up view of a black computer case with a mesh front panel showing two cooling fans inside. The case has a sleek, modern design with sharp edges and a partially visible glass side panel.

GITTERPANEELE

Ultrafeines, hochluftdurchlässiges Mesh maximiert den Luftstrom und filtert Staub.
Two computer towers: one black with a transparent side panel showing fans, and one white with a clear panel revealing RGB-lit components, liquid cooling, and a digital display inside.

GERÄUMIGE DOPPELKAMMER

Trennt wärmeerzeugende Komponenten für verbesserten Luftstrom und einen sauberen Aufbau.
Side view of a PC case with labeled fan/radiator mounting locations: front (3x120mm/3x140mm), top (3x120mm/3x140mm), bottom (3x120mm/3x140mm), and rear (1x120mm/1x140mm).

10-LÜFTER-KÜHLUNG

Fasst bis zu neun 140-mm-Lüfter und einen 120-mm-Hecklüfter.

A white gaming PC case with RGB fans and a digital display, showing interior liquid cooling tubes. Purple labels indicate maximum radiator sizes: 420 mm top/right, 120 mm rear, and 360 mm bottom.

GROSSE RADIATOREN

Fasst bis zu 420 mm Radiatoren an den oberen und vorderen rechten Paneelen für vielseitige Kühlung.
Close-up of a computers interior showing an NZXT-branded cooler with a digital display reading 32°C GPU. Purple overlay text reads Up to 435mm. Bottom right has a green label: 50 Series Ready.

MAXIMALE GRAFIK

Unterstützt GPUs bis zu 435 mm, bietet viel Platz für Grafikkarten der Spitzenklasse.
Open white computer case showing interior with highlighted motherboard tray and cable management sections in purple gradient. Multiple cable routing channels and mounting points are visible.

RÜCKVERBINDUNG BEREIT

Kompatibel mit ASUS BTF und MSI Project Zero Mainboards für ein kabelloses Aussehen.

A black NZXT computer case with its side panel open, revealing an empty interior and highlighted mounting areas. A circular inset zooms in on an internal NZXT-branded strap.

EINFACHE KABELVERWALTUNG

Extra-breite Kanäle, Klettverschlüsse und Befestigungspunkte machen die Kabelführung einfach.
Tech Specs
Höhe
506 mm
Breite
315 mm
Tiefe
481 mm
Volumen
76,7 l
Gewicht
12,46 kg
Gehäusetyp
Midi-Tower
Mainboard-Kompatibilität
E-ATX (bis zu 277 mm), ATX, Micro-ATX, Mini-ITX
Unterstützung von Mainboards mit rückseitigen Anschlüssen (BTF, Project Zero)
Ja (ATX, Micro-ATX)
Materialien
SGCC-Stahl, klares gehärtetes Glas (weiß), getöntes gehärtetes Glas (schwarz)
CPU-Kühler-Höhe
165 mm
GPU-Länge
Bis zu 459 mm (mit unter 56 mm dicken Lüftern vorn rechts) Bis zu 410 mm (mit 56 mm dicker 420 mm AIO + Lüftern vorn rechts)
PSU-Länge
200 mm
Dicke des oberseitigen Radiators und Lüfters
Bis zu 80 mm (360 mm) Bis zu 62 mm (420 mm)
USB 3.2 Typ A
2
USB 3.2 Gen2x2 Typ C
1
Kopfhörerbuchse
1
Standard
7
Vertikal
0
2,5 Zoll
4 + 2
3,5 Zoll
2
Vorderseite rechts
3 × 120 mm / 3 × 140 mm (3 × F140Q (CV) enthalten)
Oberseite
3 × 120 mm / 3 × 140 mm
Unterseite
3 × 120 mm / 3 × 140 mm
Rückseite
1 × 120 mm (1 × F120Q (CV) enthalten)
Vorderseite rechts
Bis zu 420 mm
Oberseite
Bis zu 420 mm
Unterseite
Bis zu 360 mm
Rückseite
Bis zu 120 mm
Modell
F140Q (Gehäuseversion)
Geschwindigkeit
1350 ± 150 U/min
Luftdurchsatz
170,3 m³/h
Statischer Druck
1,4 mm H₂O
Lautstärke
22,9 dB(A)
Lüfteranschluss
3-Pin
Modell
F120Q (Gehäuseversion)
Geschwindigkeit
1350 ± 150 U/min
Luftdurchsatz
102,3 m³/h
Statischer Druck
1,05 mm H₂O
Lautstärke
24,1 dB(A)
Lüfteranschluss
3-Pin
GARANTIE
2 Jahre
Modellnummer
CM-H92FW-01 CM-H92FB-01
UPC
810074847841 810074847858
EAN
5056547207636 5056547207643
4.2
Rated 4.2 out of 5 stars
Based on 18 reviews
83%would recommend this product
Total 5 star reviews: 10 Total 4 star reviews: 5 Total 3 star reviews: 1 Total 2 star reviews: 1 Total 1 star reviews: 1
Write a Review (Opens in a new window)
18 reviews
  • C
    Charles
    Verified Reviewer
    I do not recommend this product
    Rated 2 out of 5 stars
    2 weeks ago
    No front dust filter. Sad face.

    Not sure what they were thinking. Putting a filter on the bottom but not the front. Prepare yourself for cleaning once a week. At least offer a magnetic filter option for the front.

    Was this helpful?
  • AG
    Alex G.
    Verified Buyer
    I recommend this product
    Product Standouts Great Quality, Value for Money, Ease of use, Design
    Rated 5 out of 5 stars
    1 month ago
    Good design

    Looked around for my first build, chose this one and was very impressed/relieved how well thought out this case is , sturdy frame, and good size for everything and more for upgrades with a clean build.

    Haven’t found any cons to list.

    Was this helpful?
  • K
    Kevin
    I recommend this product
    Rated 5 out of 5 stars
    2 months ago
    5 Stars

    Amo este case de NZXT Se a convertido en mi compañia fav de PC, Para el que necesite saber, Este es el mejor case con el mejor sistema de ventilacion con hasta 10 abanicos en totales, Y si compras la refrigeración liquida (AIO) para el CPU, Confia en mi que no te arrepentirás....

    Was this helpful?
  • BW
    Brayton w.
    Rated 3 out of 5 stars
    2 months ago
    Not a fan of it

    This case has been a pain, wanted to support my gpu up but it obviously doesn’t even have a bottom platform to do so because of the vent at bottom, so I got the Nzxt vertical mountain kit, the h9 has holes in case to install screws through for the supporting bracket but not for the h9 flow, currently taking a drill to my case so I can get that bracket in otherwise the right side of the vertical mountain kit is just floating there. This case has been the biggest pain and I regret buying it

    Was this helpful?
  • DC
    Destin C. w.
    Verified Buyer
    I recommend this product
    Product Standouts Great Quality, Value for Money, Design
    Rated 5 out of 5 stars
    3 months ago
    Best gaming pc case

    I love it cant wait to build it and game.

    Was this helpful?
Show More

Frequently Asked Questions

LegalPrivacy PolicyTerms of ServiceDo Not Sell or Share My Personal Information