Login
Vertical GPU Mounting Kit PCIe 5.0
PCIe 5.0 Vertical GPU Mount with Anti-Sag and Multi-Position Mounting
Now rolling out to authorized retailers worldwide over the coming months. Availability varies by region and store.
Key Specs
PCIe generation: PCIe Gen 5.0 x16
Riser connector: PCIe 5.0 x16 (male-to-female)
Riser cable length: 175 mm (6.9 in)
Materials: SGCC steel
Mounting positions: 3 (High / Mid / Low)
Expansion slots required: 5 slots
Supported graphics card: Multi-slot graphics cards, up to 3 slots and thicker
Case compatibility: Standard ATX (7-slot) case with no slot dividers
Warranty: 2 years
Inside the Box
PCI slot bracket x1
Vertical GPU mounting bracket + riser cable x1
Anti-sag support bracket x1
#6-32 x 5 mm UNC screw x7
#6-32 x 25 mm UNC screw x2
Warranty & Return Policy
Warranty coverage — See NZXT warranty terms by product
Returns & exchanges — NZXT components and accessories are sold through authorized retailers. Start a return or exchange with the retailer you purchased from.
Warranty service — Submit a request to NZXT Support. Proof of purchase from an authorized NZXT retailer is required.
Overview
Turn your graphics card to face the glass without giving up a PCIe generation. A signal-tested x16 riser carries the full Gen 5 signal, and an SGCC steel bracket bolts to the motherboard mounting points to hold a heavy card level. A high wall of solid steel conceals the empty PCI slots. Three heights clear tall air coolers, AIO tubing and case fans.
- Full PCIe 5.0 x16 riser cable, tested for full signal integrity
- Motherboard-anchored anti-sag steel bracket holds heavy cards level
- Compact five-slot footprint, with every screw in the box
- Solid steel slot-hider wall
- Three mounting positions — High, Mid and Low
- Fits NZXT H5, H6, H7 and H9 and any standard ATX seven-slot case with no slot dividers
- Matte black and matte white steel
Every Lane, Full Speed
Signal-tested, end to end
A 175 mm x16 riser is tested for full PCIe 5.0 signal integrity and built on a signal-tested PCB, so the latest graphics cards run vertically at full bandwidth.
Anchored to the Motherboard
An SGCC steel bracket bolts to the motherboard mounting points. That holds a heavy card level, and lets the same mount work across cases.
Five Slots, Not Seven
It occupies five expansion slots, not all seven, and still fits any standard seven-slot ATX case with no slot dividers. Every screw you need ships in the box, and the fixed geometry means there's nothing to dial in.
A Clean Wall Behind the Card
Hides the open slots at the back of the case
A high wall of solid SGCC steel conceals the empty PCI slots a vertical mount leaves exposed, so the mount reads as part of the case.
Three Heights, One Fixed Geometry
High, Mid or Low
High, Mid and Low set the height of the card, clearing tall air coolers, AIO tubing and case fans. Each height is set by which PCIe slot the bracket occupies, so nothing needs tensioning or re-leveling.
Built for Thick Cards
Room for thick, multi-slot cards
The bracket has room for thick, multi-slot graphics cards, the heavy cards that sag most when they sit flat, and the motherboard anchoring holds them level.
Why the Riser Is the Hard Part
Twice the signaling rate
A vertical mount puts a riser cable between the slot and the card, and Gen 5 doubles the signaling rate that cable has to carry cleanly. This 175 mm riser is tested for signal integrity across its full length, so the card negotiates the same link vertically as it would seated flat.
A Full Generation Up
What changed from the last kit
It replaces the NZXT Vertical GPU Mounting Kit (PCIe 4.0) with a full PCIe generation up, five expansion slots instead of seven, and anti-sag support anchored to the motherboard, so one kit works across cases.
Start Here
Matte black or matte white
Both finishes carry the same riser, the same steel bracket and the same three heights, and both are sold through authorized retailers.
Tech Specs
Dimensions
- Dimensions (L x W x H)
- 260.1 x 117.7 x 121.8 mm
- Weight
- 0.46 kg (1.01 lb)
Construction
- PCIe generation
- PCIe Gen 5.0 x16
- Riser connector
- PCIe 5.0 x16 (male-to-female)
- Riser cable length
- 175 mm (6.9 in)
- Materials
- SGCC steel
Compatibility
- Mounting positions
- 3 (High / Mid / Low)
- Expansion slots required
- 5 slots
- Supported graphics card
- Multi-slot graphics cards, up to 3 slots and thicker
- Case compatibility
- Standard ATX (7-slot) case with no slot dividers
Product Info
- Warranty
- 2 years
- Model Number
- AB-RH175-W2 (White) / AB-RH175-B2 (Black)
- UPC
- 810074847612 (White) / 810074847605 (Black)
- EAN
- 5056547202792 (White) / 5056547202785 (Black)
Frequently Asked Questions
Will this fit my case?
It fits any standard ATX case with seven expansion slots and no dividers between the slot openings, including the NZXT H5, H6, H7 and H9. Cases with ribs or dividers between the PCI slot openings are not compatible. The kit takes five of the seven expansion slots.
Does the riser run at full PCIe 5.0 bandwidth?
Yes. The riser is tested for full PCIe 5.0 x16 signal integrity, so a current-generation graphics card runs at full bandwidth vertically.
Can I adjust the angle or height?
No. There is no tilt or roll adjustment, and the height is set by which PCIe slot the bracket occupies: High, Mid or Low. The fixed geometry is what keeps the card level.
What comes in the box?
A vertical GPU mounting bracket with riser cable, a PCI slot bracket, an anti-sag support bracket, seven #6-32 x 5 mm screws and two #6-32 x 25 mm screws.
Is there any RGB or lighting?
No. The kit has no lighting; the look comes from the solid steel slot-hider wall.