Login
H6 RGB+
Compact Dual-Chamber Mid-Tower Airflow Case
Key Specs
Dimensions (H x W x D): 448 x 292 x 420 mm (17.6 x 11.5 x 16.5 in)
Volume: 55 L
Motherboard Support: ATX, Micro-ATX, Mini-ITX
GPU Clearance: Up to 390 mm (with 30 mm front-right fan)
CPU Cooler Clearance: Up to 165 mm (6.5 in)
Front I/O: 2x USB 3.2 Type-A, 1x USB 3.2 Gen 2x2 Type-C, 1x headset jack
Inside the Box
H6 RGB+
F360 RGB Reverse x2
F120 RGB x1
Control Hub Lite
Installation Accessories
User Guide
Warranty & Return Policy
Warranty coverage — See NZXT warranty terms by product
Returns & exchanges — NZXT components and accessories are sold through authorized retailers. Start a return or exchange with the retailer you purchased from.
Warranty service — Submit a request to NZXT Support. Proof of purchase from an authorized NZXT retailer is required.
Resources
Overview
The H6 is a compact mid-tower PC case built for builders who want a seamless blend of performance and design. Its dual-chamber layout, redesigned high-airflow mesh, and angled front-right fans deliver targeted, powerful cooling, while one piece of tempered glass — bent to a tight radius for minimal distortion — puts your build on full display. Support for up to 10 x 120 mm fans, radiators up to 360 mm, a built-in GPU anti-sag bracket, and back-connect motherboard compatibility make the H6 fully equipped for modern, high-performance builds. Available as the H6 (no fans included) or the H6 RGB+ (pre-installed F360 RGB Reverse intake fans, F120 RGB exhaust, and Control Hub Lite).
- Compact 55 L dual-chamber ATX mid-tower
- One-piece curved tempered glass — tight bend radius, minimal distortion
- High-airflow mesh across top, front-right, and right panels
- Support for up to 10 x 120 mm fans
- Radiator support up to 360 mm at the top
- Built-in GPU anti-sag bracket
- Back-connect motherboard compatibility (BTF, Project Zero, Project Stealth)
- Tool-less side panels and smart cable routing
- H6 RGB+ ships with pre-installed RGB fans and Control Hub Lite
COMPACT DUAL-CHAMBER. BUILT YOUR WAY.
Compact dual-chamber ATX with seamless curved glass, high-airflow mesh, and a ready-to-run RGB setup out of the box.
Dual-Chamber Design
A dedicated secondary chamber isolates power and cabling, while angled front-right fans deliver targeted airflow to your hottest components.
Seamless Curved Glass
One-piece tempered glass bent to a tight radius for minimal distortion — every component front and center.
10 x 120 mm Fan Support
Standardized 120 mm mounts across top, front-right, bottom, and rear for flexible cooling configurations.
Liquid Cooling Ready
Supports radiators up to 360 mm at the top for high-performance AIO builds.
High-Airflow Mesh
Ultra-fine mesh across top, front-right, and right improves airflow, with a removable bottom dust filter.
GPU Anti-Sag Bracket
Integrated adjustable bracket keeps heavy modern GPUs firmly supported and aligned.
Back-Connect Motherboard Ready
Compatible with BTF, Project Zero, and Project Stealth hidden-connector motherboards for a cable-free look.
Effortless Building
Tool-less side panels, cable routing channels, and built-in Velcro straps keep your build clean and maintenance-friendly.
Tech Specs
General
- Enclosure Type
- Dual-chamber ATX case
- Motherboard Support
- ATX, Micro-ATX, Mini-ITX
- Back-Connect Motherboard Support
- Yes (ATX)
- Power Supply Type
- ATX
- Materials
- Steel, tempered glass
Dimensions
- Dimensions (H x W x D)
- 448 x 292 x 420 mm (17.6 x 11.5 x 16.5 in)
- Volume
- 55 L
- Weight
- 9.3 kg (20.5 lb)
Clearance
- CPU Cooler Height
- Up to 165 mm (6.5 in)
- GPU Length
- Up to 390 mm (with 30 mm front-right fan)
- PSU Length
- Up to 200 mm (7.9 in)
- Cable Routing Space
- Up to 90 mm (3.5 in)
- Front-Right Fan Thickness
- Up to 30 mm (without limiting GPU length)
- Top Radiator + Fan Thickness
- Up to 67 mm (2.6 in)
Front I/O
- USB 3.2 Type-A
- 2
- USB 3.2 Gen 2x2 Type-C
- 1
- Headset Jack
- 1
Expansion & Drives
- Expansion Slots
- 7
- 2.5" Drive Bays
- 2
- 3.5" Drive Bays
- 1
Cooling Support
- Front-Right Fans
- 3 x 120 mm
- Top Fans
- 3 x 120 mm
- Bottom Fans
- 3 x 120 mm
- Rear Fan
- 1 x 120 mm
- Top Radiator
- Up to 360 mm (Up to 400 mm)
- Rear Radiator
- Up to 120 mm
Included Fan Specs
- Model
- F360 RGB Reverse / F120 RGB
- Quantity
- 2 / 1
- Speed
- 2,200 ± 220 RPM / 2,400 ± 240 RPM
- Airflow
- 62.14 CFM / 70.67 CFM
- Static Pressure
- 2.7 mmH₂O / 3.7 mmH₂O
- Noise Level
- 34.39 dBA / 33.05 dBA
- Fan Connector
- 8-pin (4-pin PWM and NZXT RGB combo) / 4-pin
Control Hub
- Fan Channels
- 2 x NZXT 8-pin (PWM only) / 1 x 4-pin PWM (DC+PWM control)
- RGB Channels
- 2 x NZXT 8-pin / 1 x NZXT RGB
- Max LED Support
- Each NZXT 8-pin channel supports a maximum of 96 LEDs. NZXT RGB channel supports up to 40 LEDs and up to 5 NZXT devices.
- System Requirements
- USB 2.0 Internal Header / SATA Power
Cable Management
- Fixed Velcro Straps
- Yes
- Included Zip Ties
- Yes
Product Info
- Warranty
- 2 years
- Model Number
- CC-H62FW-P1 (White) / CC-H62FB-P1 (Black)
- UPC
- 810074846905 (White) / 810074846899 (Black)
- EAN
- 5056547209364 (White) / 5056547209357 (Black)
Frequently Asked Questions
What comes pre-installed on the H6 RGB+?
- Two F360 RGB Reverse fans as front-right intake
- One F120 RGB fan as rear exhaust
- One Control Hub Lite for fan and lighting control
Everything is wired from the factory, so the build lights up and runs in NZXT CAM straight away.
What are reverse fans, and why does the H6 RGB+ use them?
Reverse-blade fans turn the clean, illuminated side of the fan toward the glass. In the H6 RGB+ the front-right intake fans face into the chamber you actually look at, so you see a smooth lit face rather than the back of the fan.
Airflow direction is unchanged: they still pull cool air in across the GPU and CPU.
How do I control the lighting and fans?
Through NZXT CAM, using the included Control Hub Lite. It provides:
- Fans: two NZXT 8-pin channels (PWM) plus one 4-pin channel (DC and PWM)
- Lighting: two NZXT 8-pin channels plus one NZXT RGB channel
- Up to 96 LEDs per 8-pin channel; the NZXT RGB channel takes up to 40 LEDs across up to five devices
It connects to an internal USB 2.0 header and SATA power.
How much more cooling can I add?
The chassis takes ten 120 mm fans in total, across the front-right, top, bottom and rear mounts, so there is room beyond the pre-installed set.
Radiators go up to 360 mm at the top (400 mm models also fit) and 120 mm at the rear, with up to 67 mm for combined radiator and fan thickness up top.
How is it different from the standard H6?
The chassis is identical: the same 55 L dual-chamber layout, panels, clearances and fan mounts. Only the contents differ.
The standard H6 ships with no fans so you choose your own cooling. The RGB+ arrives with fans and a Control Hub Lite fitted, which brings it to 9.3 kg (20.5 lb) against 7.94 kg (17.5 lb).
Related Products
Price$149.99
Price$354.97
Price$119.99
Price$69.99
Price$3,999.00
Price$2,699.00
Price$1,499.00
Price$1,749.00