Connexion
H9 Flow RGB+
Grand Boîtier ATX à Flux d'Air à Double Chambre de Taille Moyenne
Choisir les options
Vue d'ensemble
Le H9 Flow est un boîtier ATX mi-tour spacieux conçu pour des configurations haute performance, équilibrant flux d'air et esthétique. Son design à double chambre améliore le refroidissement et la gestion des câbles, tandis que les panneaux perforés, les ventilateurs inclinés et le support généreux pour ventilateurs et radiateurs offrent des performances thermiques optimales.
- Conception à double chambre : Sépare les composants principaux de l'alimentation et des disques pour améliorer les performances thermiques et la gestion des câbles.
- Flux d'air optimisé : Les panneaux en acier perforés et les ventilateurs avant-droit inclinés assurent un refroidissement efficace pour les constructions haute performance.
- H9 Flow RGB+ : * Prêt pour RGB : Comprend deux ventilateurs à cadre unique F420 RGB Core, un ventilateur F120 RGB Core (CV) à l'arrière, et un NZXT Control Hub. CV = Version du boîtier (DC à 3 broches)
- Capacité de dix ventilateurs : Prend en charge jusqu'à neuf ventilateurs de 140 mm sur le dessus, à l'avant-droit et en bas, plus un ventilateur de 120 mm à l'arrière.
- Vue panoramique : Mettez en valeur chaque détail de votre construction avec des panneaux en verre trempé sans couture et enveloppants.
- Grands radiateurs et GPU : Accueille jusqu'à un radiateur de 420 mm sur le dessus et à l'avant-droit, avec beaucoup d'espace pour les cartes graphiques haut de gamme.
- Gestion facile des câbles : Canaux extra-larges, sangles Velcro intégrées et points d'attache facilitent le routage des câbles.
- Prêt pour la connexion arrière : Compatible avec les cartes mères à connexion arrière comme ASUS BTF et MSI Project Zero pour un look sans câbles.
CONÇU POUR CIRCULER. FAIT POUR MONTRER.
Flux d'air optimisé
PANNEAUX EN MAILLE
CHAMBRE DOUBLE SPACIEUSE
10 VENTILATEURS
GRANDS RADIATEURS
GRAPHISMES MAXIMUM
CONNECTEURS ARRIÈRE
GESTION FACILE DES CÂBLES
- NNickRated 4 out of 5 starsJul 17, 2025So close to being great. Still the best case I’ve had.
I’ve had 3-4 cases in the past. The lian li dynamic mini, Nzxt h9 flow 2024, Phantek evolv x2, and now this.
It’s a really good case and well diverse. Personally, I think a bunch of 360mm fans doesn’t look as good as 420mm fans that fill in all of the space. 420mm (140x3) fans provide a slight temperature decrease by 3-4c under load but the main advantage is the less noise they produce. Saying that, 360mm fans will work fine and the temperature difference doesn’t really matter. But, if you want the best performance and aesthetic then get 420mm. The side mounted radiator also looks better than a top imo. A top mounted radiator eats up a lot of vertical space. The side mounted 420mm radiator fills in the angled space. Also, the view of the fans aren’t cut off as they would be with a top mounted. I used this case with a backward connect motherboard which had some issues.
Performance wise, it’s what you would expect you get in a case with a bunch of 140mm fans. The best performing case I’ve had.
There’s only one dust filter and it’s on the bottom. I don’t know why they didn’t add dust filters on every other meshed area of the case because there’s a lot of them. The holes are small enough where I don’t think too much dust will get in but definitely not as small as the cut outs of a dust filter.
The case is almost tool-less. NZXT really thought it through. You dont even need to watch a YouTube video or read the manual, it’s pretty straightforward. Most of the screws are twist…
- CMchris m.Verified BuyerRated 3 out of 5 starsJul 6, 2025its a good case however
It is a good case however there is still much that needs improved. There is a lot of room for activities.
To mount water-cooling on the front side is kind of a pain and you cant put the radiator in the correct orientation due to there not being enough room for the lines. You also cant do push pull in this location. Overall im jus meh with the case. I havnt tried to top mount the Rad yet that will be a whole different endeavor.
The case is also not tooless. There are way to many tiny screws. Way to many.
- PparandroidVerified ReviewerRated 5 out of 5 starsJun 10, 2025Look Meets Function
I have already built a setup in a H6 Flow RGB, but for myself it would have been too small. Previous H9 would have been an option, but I do not like the arrengement of the side fans in the plane of the mainboard. Then I have seen this in the Computex 2025 news, and fell in love at first sight. Just what I've been looking for.
+ Price is somewhat horrendous, but hey, it comes with all the fans + the controller we need, and in the end, it looks marvelous.
+ Quality is the usual nzxt level, keep up the good work guys.
+ Air flow is just supreme, noise level can be kept down at low temperature (and I somehow love the turbine noise at startup when all the fans are released at 100% xD ).
+ Installation, hardware upgrade is a walk in the park, it's the most spacious case I ever worked with.
+ It looks awesome!
Still some minor points for improvement:
- Rear fan placement and implementation needs a second thought or two, it stands out in the wrong way - not as fluid and smooth in design as all the others.
- No in-house solution for GPU anti sag. Still had to find a 3rd party solution and that does not look so good. The nzxt vertical bracket would also look strange in this one, and not everyone wants a vertical GPU that hides most of the mainboard.
- Cable management (cable holes) between the two compartment could be somewhat better covered.
Due to pricing and the few little annoyances I would rate it 9,5/10, but no question about the 5 stars rating. Would buy it again. And…
- ONOli N.Verified BuyerRated 5 out of 5 starsJun 5, 2025This is what I'm looking for
Good case, good airflow. Everything is perfect inside the case