Cambia lingua

Paese/Area geografica

Carrello

Il tuo carrello è vuoto
The NZXT H9 Flow is a white ATX case with a transparent side panel, visible front and rear cooling fans for airflow, and multiple USB ports on the bottom front edge.
The NZXT H9 Flow is a white ATX case with an angled front-right corner, dual-chamber design for better airflow, and labeled dimensions: 506mm (H) x 481mm (D) x 315mm (W).
The NZXT H9 Flow is a white ATX case with three pre-installed front fans, one rear fan, optimized airflow, and includes F140Q and F120Q three-pin DC fans. Three additional fans are placed outside the case.
The NZXT H9 Flow is a dual-chamber ATX case with labeled spots for radiators and fans, supporting up to 420 mm radiators on top and front, 360 mm on the bottom, and up to ten fans. Text reads Expansive Cooling.
The NZXT H9 Flow case features a spacious interior highlighted in purple, supporting high-performance GPUs up to 435mm for maximum graphics and optimized airflow.
The NZXT H9 Flow ATX case is shown with a dual-chamber design, clearly separating components. Arrows highlight optimized airflow for better cooling and easier cable management. Text reads: “Dual-Chamber Design. Spacious layout boosts airflow and organization.”.
The NZXT H9 Flow is a white ATX case with wraparound glass panels that reveal internal components and cooling fans; text below reads Panoramic Paneling, describing its clear view and airflow optimized for showcasing your build.
The NZXT H9 Flow, a white ATX case with its side panel open, shows a clean dual-chamber design optimized for back-connect motherboards. Purple highlights mark support zones. Text: “Back-Connect Support. Compatible with ASUS BTF and MSI Project Zero.”.
The NZXT H9 Flow is a white ATX case with purple-accented cable channels and straps, featuring a dual-chamber design for easy cable management, wide channels, built-in Velcro straps, and multiple tie-down points.
The NZXT H9 Flow is a black ATX case featuring a transparent side panel, visible cooling fans for optimized airflow, an empty interior, and convenient front panel ports.
The NZXT H9 Flow is a black ATX case with a dual-chamber design, glass panels to showcase the interior and cooling fans, and measures 506mm (height) x 481mm (depth) x 315mm (width).
The NZXT H9 Flow ATX case offers a dual-chamber design for optimized airflow, supports up to ten fans, and accommodates radiators up to 420mm (top/front), 360mm (bottom), and 120mm (rear).
The NZXT H9 Flow, a black ATX case, features three pre-installed F140Q (CV) front-right fans and one F120Q (CV) rear fan for optimized airflow. CV stands for Case Version (3-pin DC).
Close-up of the NZXT H9 Flow ATX case build, showing space for graphics cards up to 435 mm, with a “50 SERIES READY” label. Caption: “H9 Flow: Dual-chamber design optimizes airflow and supports GPUs up to 435 mm.”.
The NZXT H9 Flow is a dual-chamber ATX case featuring wraparound glass panels that showcase internal components and sleek cable management, offering a panoramic view to turn your build into a visual display.
The NZXT H9 Flow is an ATX case with a spacious dual-chamber design that separates heat-generating parts for improved airflow and easier cable management.
The NZXT H9 Flow is a black ATX case with a dual-chamber design and open side panel, optimized for back-connect motherboards. Compatible with ASUS BTF and MSI Project Zero for a clean, cable-free interior.
The NZXT H9 Flow ATX case in black with purple accents is displayed open, highlighting wide cable channels, Velcro straps, tie-down points for easy cable management, and optimized airflow among other features.

H9 Flow

Large Dual-Chamber Mid-Tower ATX Airflow Case

4.2
Rated 4.2 out of 5 stars
4.2 Stars (18 Reviews)
Color:

Color

Your Prepay and Save Options

Choose the plan that works best for you.

Month-to-Month

Cancel and return anytime with no fees. This option provides maximum flexibility with no long-term obligations.

Prepaid Terms

Prepay for a multi-month term (3, 6, 12 months) and lock in a lower effective monthly rate.

When your term ends, you have simple options:

1

Month-to-Month: By default, your subscription automatically converts to the month to month rate requiring no action from you.

2

Prepay Again: Alternatively, you can choose to prepay for another 3, 6, or 12 month term.

3

End Subscription: Cancel and return with no fees.

Overview

L'H9 Flow è un ampio case mid-tower ATX progettato per build ad alte prestazioni, bilanciando flusso d'aria ed estetica. Il suo design a doppia camera migliora il raffreddamento e la gestione dei cavi, mentre i pannelli perforati, le ventole angolate e il supporto abbondante per ventole e radiatori offrono prestazioni termiche ottimali.

  • Design a doppia camera: Separa i componenti principali dall'alimentatore e dai drive per migliorare le prestazioni termiche e la gestione dei cavi.
  • Flusso d'aria ottimizzato: Pannelli in acciaio perforato e ventole angolate frontali destre garantiscono un raffreddamento efficiente per build ad alte prestazioni.
  • Ventole preinstallate: Include tre ventole F140Q (CV) nella parte anteriore destra e una ventola F120Q (CV) nella parte posteriore. CV = Versione Case (3-pin DC)
  • Capacità di dieci ventole: Supporta fino a nove ventole da 140mm nella parte superiore, anteriore destra e inferiore, più una ventola da 120mm nella parte posteriore.
  • Vista panoramica: Mostra ogni dettaglio della tua build con pannelli in vetro temperato senza soluzione di continuità.
  • Grandi radiatori e GPU: Adatto a un radiatore fino a 420mm nella parte superiore e anteriore destra, con ampio spazio per schede grafiche di fascia alta.
  • Gestione dei cavi facile: Canali extra-larghi, cinghie in Velcro integrate e punti di fissaggio rendono il routing dei cavi senza sforzo.
  • Pronto per connessione posteriore: Compatibile con schede madri a connessione posteriore come ASUS BTF e MSI Project Zero per un aspetto senza cavi.
H9 Line up - Built to Flow. Made to Show.

COSTRUITO PER FLUIRE. FATTO PER MOSTRARE.

L'H9 Flow è un case spazioso a doppia camera progettato per build ad alte prestazioni, con ampio supporto per il raffreddamento e pannelli in vetro avvolgenti per una vista ininterrotta del tuo build.
A PC case with RGB lighting, illustrating airflow: blue arrows show cool air entering from the bottom and right, while purple arrows show warm air exiting from the top and left. Temperature display on the CPU cooler reads 32°C.

Flusso d'aria ottimizzato

Ventole angolate frontali destre e un layout ottimizzato per il flusso d'aria mantengono basse le temperature e le prestazioni stabili.
Close-up view of a black computer case with a mesh front panel showing two cooling fans inside. The case has a sleek, modern design with sharp edges and a partially visible glass side panel.

PANNELLI A RETE

Maglia ultra-fine ad alto flusso d'aria massimizza il flusso d'aria mentre filtra la polvere.
Two computer towers: one black with a transparent side panel showing fans, and one white with a clear panel revealing RGB-lit components, liquid cooling, and a digital display inside.

AMPIA DOPPIA CAMERA

Separa le fonti di calore per un flusso d'aria migliorato e una costruzione più pulita.
Side view of a PC case with labeled fan/radiator mounting locations: front (3x120mm/3x140mm), top (3x120mm/3x140mm), bottom (3x120mm/3x140mm), and rear (1x120mm/1x140mm).

10 VENTOLE

Può ospitare fino a nove ventole da 140 mm e una ventola posteriore da 120 mm.

A white gaming PC case with RGB fans and a digital display, showing interior liquid cooling tubes. Purple labels indicate maximum radiator sizes: 420 mm top/right, 120 mm rear, and 360 mm bottom.

GRANDI RADIATORI

Admite radiadores de 420 mm en la parte superior y frontal para una refrigeración flexible.
Close-up of a computers interior showing an NZXT-branded cooler with a digital display reading 32°C GPU. Purple overlay text reads Up to 435mm. Bottom right has a green label: 50 Series Ready.

GRAFICA MASSIMA

Supporta GPU fino a 435 mm, offrendo ampio spazio per schede grafiche di fascia alta.
Open white computer case showing interior with highlighted motherboard tray and cable management sections in purple gradient. Multiple cable routing channels and mounting points are visible.

CONNETTORI POSTERIORI

Compatibile con le schede madri ASUS BTF e MSI Project Zero per un aspetto senza cavi.

A black NZXT computer case with its side panel open, revealing an empty interior and highlighted mounting areas. A circular inset zooms in on an internal NZXT-branded strap.

GESTIONE DEI CAVI FACILE

Canali extra-larghi, cinghie in velcro e punti di ancoraggio semplificano l'instradamento dei cavi.
Tech Specs
Altezza
506 mm (19,9 pollici)
Larghezza
315 mm (12,4 pollici)
Profondità
481 mm (18,9 pollici)
Volume
76,7 L
Peso
12,46 kg (27,47 lb)
Tipo di contenitore
Torre media
Compatibilità con scheda madre
E-ATX (fino a 277 mm), ATX, Micro-ATX, Mini-ITX
Supporto per scheda madre con collegamento posteriore (BTF, Project Zero)
Sì (ATX, Micro-ATX)
Materiali
Acciaio SGCC, vetro temperato trasparente (bianco), vetro temperato colorato (nero)
Altezza del dissipatore della CPU
165 mm
Lunghezza GPU
Fino a 459 mm (con ventole di spessore <56 mm installate nella parte anteriore destra) Fino a 410 mm (con AIO da 420 mm di spessore 56 mm e ventole installate nella parte anteriore destra)
Lunghezza della PSU
200 mm
Spessore del radiatore superiore e della ventola
Fino a 80 mm (360 mm) Fino a 62 mm (420 mm)
USB 3.2 Tipo A
2
USB 3.2 Gen2x2 Tipo C
1
Presa per cuffie
1
Standard
7
Verticale
0
2,5 pollici
4+2
3,5 pollici
2
Anteriore destro
3 x 120 mm / 3 x 140 mm (3 x F140Q (CV) inclusi)
Superiore
3 x 120 mm / 3 x 140 mm
Inferiore
3 x 120 mm / 3 x 140 mm
Posteriore
1 x 120 mm (1 x F120Q (CV) incluso)
Anteriore destro
Fino a 420 mm
Superiore
Fino a 420 mm
Inferiore
Fino a 360 mm
Posteriore
Fino a 120 mm
Modello
F140Q (CV)
Velocità
1 350 ± 150 giri/min
Flusso d'aria
100,25 CFM
Pressione statica
1,4 mm-H₂O
Rumorosità
22,9 dBA
Connettore della ventola
A 3 pin
Modello
F120Q (CV)
Velocità
1 350 ± 150 giri/min
Flusso d'aria
60,2 CFM
Pressione statica
1,05 mm-H₂O
Rumorosità
24,1 dBA
Connettore della ventola
A 3 pin
GARANZIA
2 anni
Numero del modello
CM-H92FW-01 CM-H92FB-01
UPC
810074847841 810074847858
EAN
5056547207636 5056547207643
4.2
Rated 4.2 out of 5 stars
Based on 18 reviews
83%would recommend this product
Total 5 star reviews: 10 Total 4 star reviews: 5 Total 3 star reviews: 1 Total 2 star reviews: 1 Total 1 star reviews: 1
Write a Review (Opens in a new window)
18 reviews
  • C
    Charles
    Verified Reviewer
    I do not recommend this product
    Rated 2 out of 5 stars
    1 month ago
    No front dust filter. Sad face.

    Not sure what they were thinking. Putting a filter on the bottom but not the front. Prepare yourself for cleaning once a week. At least offer a magnetic filter option for the front.

    Was this helpful?
  • AG
    Alex G.
    Verified Buyer
    I recommend this product
    Product Standouts Great Quality, Value for Money, Ease of use, Design
    Rated 5 out of 5 stars
    2 months ago
    Good design

    Looked around for my first build, chose this one and was very impressed/relieved how well thought out this case is , sturdy frame, and good size for everything and more for upgrades with a clean build.

    Haven’t found any cons to list.

    Was this helpful?
  • K
    Kevin
    I recommend this product
    Rated 5 out of 5 stars
    2 months ago
    5 Stars

    Amo este case de NZXT Se a convertido en mi compañia fav de PC, Para el que necesite saber, Este es el mejor case con el mejor sistema de ventilacion con hasta 10 abanicos en totales, Y si compras la refrigeración liquida (AIO) para el CPU, Confia en mi que no te arrepentirás....

    Was this helpful?
  • BW
    Brayton w.
    Rated 3 out of 5 stars
    3 months ago
    Not a fan of it

    This case has been a pain, wanted to support my gpu up but it obviously doesn’t even have a bottom platform to do so because of the vent at bottom, so I got the Nzxt vertical mountain kit, the h9 has holes in case to install screws through for the supporting bracket but not for the h9 flow, currently taking a drill to my case so I can get that bracket in otherwise the right side of the vertical mountain kit is just floating there. This case has been the biggest pain and I regret buying it

    Was this helpful?
  • DC
    Destin C. w.
    Verified Buyer
    I recommend this product
    Product Standouts Great Quality, Value for Money, Design
    Rated 5 out of 5 stars
    3 months ago
    Best gaming pc case

    I love it cant wait to build it and game.

    Was this helpful?
Show More

Frequently Asked Questions

LegalPrivacy PolicyTerms of ServiceDo Not Sell or Share My Personal Information